Dinamap Pro 100V2 Dokumentacja Pobierz pdf (Strona 33)

Using the Monitor

When a monitor mode measurement is in progress, it is

terminated when the probe is inserted into the probe holster.

Note: These temperature readings are not stored in trends

and not reported via host comms.

General Warning

• The performance of the Monitor may be degraded if it

is operated outside of the environmental conditions

specified in Appendix A.

General Cautions

• Be careful not to overextend the coiled cord of the

temperature probe. Overextension can damage the

probe coil connector interfaces.

• Accurate oral temperatures (blue) can only be obtained

by placing the probe under the tongue in the right or

left sublingual pocket. Temperatures in other locations

in the mouth can vary by more than 2 °F or 1 °C.

• Accurate rectal temperatures can only be obtained by

using the red temperature probe. Red and blue

temperature probes are not interchangeable.

• Do not allow the tip of the predictive temperature

probe to come into contact with a heat source (e.g.,

hands or fingers) prior to taking a temperature

determination. If this occurs, allow 5 seconds for the

probe tip to cool before proceeding.

• Electromagnetic Compatibility: Operating the

thermometer near equipment which radiates high-

energy electromagnetic and radio frequencies

(electrosurgical/cauterizing equipment, portable

radios, cellular telephones, etc.) may cause false alarm

conditions. If this happens, reposition the thermometer

away from the source of interference and perform a

new measurement.

• Use only IVAC

Probes and P850A probe covers with

the TURBO



TEMP™ Thermometer. The size, shape,

and thermal characteristics of the probe covers can

affect the performance of the instrument. Inaccurate

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 107 108

Brak uwag

Dinamap Pro 100V2 Dokumentacja Strona 33